Description
Wilwood Dynapro big front brake kit for 2G DSM is available with red or black calipers and your choice of standard or slotted/drilled black rotors. Please note, you will also need the brake lines linked below which are sold separately.
Vehicle Fitment:
1995-1999 Eclipse GST/GSX
1995-1998 Talon TSi
Required for Install:
Wilwood 2G DSM Front Brake Lines (220-8293) (sold separately)
Brake Kit Installation:
PDF Install Instructions
Quick Specs:
15″ minimum wheel diameter required
This brake kit may fit 15-inch wheels. *Please refer to the wheel clearance diagram to check to see if it will fit your specific wheel
Rotor Diameter 12.19″
Rotor Thickness 0.81″
4 Piston Calipers
BP-10 Brake Pads 150-8946
Included/Replacement Part Numbers:
All parts of the brake kits are available for maintenance or replacement.
Caliper Mounting Brackets (250-8321)
BP-10 Brake Pads (150-8946)
Bolt, 7/16-20 x 1.25″ Hex Head (230-9897)
Washer, .453″ I.D. x .750″ O.D. x .063″ Thick (240-11101)
Shim, .016″ Thick (240-5680)
Rotor Hat (170-8320)
Anti-Squeal Shims (300-12177)
Bolt, 5/16-18 x 1.00″ Long, Button Head Torx (230-11935)
Nut, 3/8-24 Self-Locking, 6 Point (230-16550)
Washer, .391″ I.D. x .625″ O.D. x .063″ Thick (240-10190)
Shim, .016″ Thick (240-10306)
Spacer, .425″ Long (300-7352)
Stud, 3/8-16 x 3/8-24 x 3.15″ Long (pre-installed in bracket) (230-9079)
Calipers (see below)
Rotors (see below)
| Brake Kit: | Calipers: | Rotors: |
| 140-8292-DR | Red LH/RH: 120-14706-RD |
Drill/Slot Black Electro Coat LH: 160-7104-BK RH: 160-7103-BK |
| 140-8292-R | Red LH/RH: 120-14706-RD |
Standard LH/RH: 160-5843 |
| 140-8292-D | Black LH/RH: 120-14706-BK |
Drill/Slot Black Electro Coat LH: 160-7104-BK RH: 160-7103-BK |
| 140-8292 | Black LH/RH: 120-14706-BK |
Standard LH/RH: 160-5843 |
LH vs RH?
Left Hand and Right Hand is determined by driver position. From the driver seat, which side is it on?
See more Wilwood Parts
Reviews
There are no reviews yet.